1984 Mirage Yachts Kirby 30

1984 Mirage Yachts Kirby 30

Amazing Storeys is a modified Kirby 30 sailboat launched in the spring of 1984, after production of this model had ended the year before.  Although listed as hull 88 it was in fact a one off designed to exacting specifications from an experienced MORC sailor and differs considerably from a standard Kirby.  The mast is 18” taller and set back from the bow about 2 ft. further than the normal Kirby. The result a significantly larger fore triangle and overall sail area.  It is 29’10” overall,  27 ft. at the waterline and an 8 ft. beam.  It has (2) 4” dia. aluminum tubes running from the stern to the bow giving it substantial additional structural strength and permitting exceptional tension on the running back stays without any deflection of the hull.  The present sail inventory is overwhelmingly Doyle Boston with a couple of Ulmer Kolius.  The boat has been used primarily for racing with lots of day sailing and the occasional overnighter.

Spare dual track forestay (became redundant when new roller furling was installed)

1 – storm jib

2  – #3 genoa sails (100%)

1 – 155% genoa sail

1 – 145% genoa

1 – 135% genoa sail

1 – 145 % used for roller furling

1 – ¾ oz spinnaker

2 – 0.6 oz spinnakers

1 – main (includes sail cover)

 

Raymarine ST60 – wind, depth, speed with one wind repeater

2 Plastimo Contest gimballed bulkhead mounted compasses

VHF Radio Shakespeare SE 2001

Sony CDXGT 23 stereo system – 2 interior and 2 cockpit speakers

 

2 deep cycle batteries 2020

Dual battery charger stat power recharge

Shore power and GPCI 120 V AC outlet

50 ft. 30 Amp shore power cord with 15 Amp converter

2 12V DC outlets

 

Anchor and anchor rode

Marine Head and holding tank

Electric and manual bilge pumps

Main berth cabin cushions

Privacy screens for forward compartment

 

Volvo Penta MB2A/50S 2 stroke 7.5 HP pull start gas engine

Sail drive configuration and Gori folding prop

5 gallon portable fuel tank

 

All necessary hardware, sheets, halyards for fully equipped spinnaker racing

3 docking fenders and docking lines

4 #40 Lewmar winches, 2 self-tailing

2 #16 Lewmar winches, both self-tailing

Various miscellaneous lines, hardware, basic tools, lubricants, first aid kit, flares, winch handles

 

1975 CMF Trailer VIN 81608 – used many times over the years and has been well maintained.

Sails and Rigging

Spare dual track forestay (became redundant when new roller furling was installed)

1 – storm jib

2  – #3 genoa sails (100%)

1 – 155% genoa sail

1 – 145% genoa

1 – 135% genoa sail

1 – 145 % used for roller furling

1 – ¾ oz spinnaker

2 – 0.6 oz spinnakers

1 – main (includes sail cover)

 

Electronics and Navigation

Raymarine ST60 – wind, depth, speed with one wind repeater

2 Plastimo Contest gimballed bulkhead mounted compasses

VHF Radio Shakespeare SE 2001

Sony CDXGT 23 stereo system – 2 interior and 2 cockpit speakers

 

Engine and Propulsion System

Volvo Penta MB2A/50S   SAILDRIVE  2 stroke 7.5 HP pull start gasoline engine

Gori folding prop

5 gallon portable fuel tank

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Dimensions

Length Overall: 30ft
Max Draft: 5.5ft
Beam: 10.25ft

Accommodations

Heads: 1

A1 Yacht Sales

1984 Mirage Yachts Kirby 30

Boat Price

Boat Year

Length

Location

Chatham, Ontario

Make & Model

Mirage Yachts Kirby 30

Inquire About 1984 Mirage Yachts Kirby 30